IDK MSD-72 Series Command Reference Manual page 101

@GBT / @SBT
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting aspect ratio of OUT1.
Setting Command
example Response
Description Setting the aspect ratio of bitmap 1 that is output to OUT1 to FLL.
Remarks
Aspect ratio
@GBT, ch
@GBT, ch, aspect_1, aspect_2, aspect_3, aspect_4
@SBT, ch_1, bitmap_1, aspect_1 (, ch_2, bitmap_2, aspect_2･･･)
@SBT, ch_1, bitmap_1, aspect_1 (, ch_2, bitmap_2, aspect_2･･･)
ch: Output channel
1 = OUT1 to 4 = OUT4
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
aspect_1-4: Aspect ratio
0 = AUTO [Default],
Getting commands: registered bitmap settings is returned in order.
bitmap_1-4: Bitmap number
0 = all bitmaps,
3 = bitmap 3,
Only registered numbers can be specified.
@GBT,1
@GBT,1,1,1,1,1
Displayed on FULL screen.
@SBT,1,1,1
@SBT,1,1,1
－
MSD-72 series Command Guide
1 = FULL, 2 = THROUGH
1 = bitmap 1, 2 = bitmap 2,
4 = bitmap 4
101