IDK MSD-72 Series Command Reference Manual page 104

MSD-72 series Command Guide
@GBD / @SBD
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the divide setting for bitmap memory.
Setting Command
example Response
Description Dividing bitmap memory into two in RESIZE mode.
Remarks
@GBV
Getting Command
Response
Parameter
Getting Command
example Response
Description Getting the actual status of bitmap memory.
Remarks
104
Dividing bitmap memory
@GBD
@GBD, num, block_1 (, block_2･･･)
@SBD, num, mode (, block_1, block_2･･･)
@SBD, num, mode, block_1 (, block_2･･･)
num: The number of divides
1 to 4 [Default] 1
block_1-4: Block size of each memory
0 to 128 [Default] 128
Specify and return the divided block size.
1 block: 65,536 bytes, the total size of all bitmaps: 128 blocks (8,388,608 bytes
or smaller)
Specify only if "3" is selected for the "mode" below. If you set the divide mode to
"3", specify this value.
mode: Divide mode
0 = AUTO, 1 = RESIZE, 2 = FORCE, 3 = Specify size
If you select "3", set size_1-4 below.
@GBD
@GBD,2,64,64
Bitmap 1 and bitmap 2: 64 blocks (4,194,304 bytes) are allocated for each.
@SBD,2,1
@SBD,2,1,64,64
Bitmap 1 and bitmap 2: 64 blocks (4,194,304 bytes) are allocated for each.
－
Bitmap memory status
@GBV
@GBV, num, block_1 (, block_2･･･)
num: The number of divides
1 to 4 [Default] 1
block_1-4: Block size of each memory actually used
0 to 128 [Default] 128
@GBV
@GBV,2,32,0
Bitmap 1: 32 blocks (2,097,152 byes) are used, bitmap 2: not registered.
－