IDK MSD-72 Series Command Reference Manual page 33

@GTP / @STP
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Test pattern
@GTP
@GTP, pattern_1, scroll_1, pattern_2, scroll_2, pattern_3, scroll_3, pattern_4,
scroll_4
@STP, ch_1, pattern_1, scroll_1 (, ch_2, pattern_2, scroll_2･･･)
@STP, ch_1, pattern_1, scroll_1 (, ch_2, pattern_2, scroll_2･･･)
pattern_1-4: Test pattern
0 = OFF [Default],
2 = HORIZONTAL COLOR BAR,
4 = HORIZONTAL GRAY SCALE,
6 = HORIZONTAL LAMP,
8 = 50% WHITE RASTER,
10 = 100% GREEN RASTER,
12 = CROSS HATCH,
14 = VERTICAL STRIPE,
16 = VERTICAL ZEBRA,
Test pattern numbers 1 to 6, 16 and 17 can be scrolled.
scroll_1-4: Scrolling
0 = OFF [Default],
1 = 3 pixels/1 frame to 10 = 30 pixels/1 frame
The number of pixels to be scrolled per frame = the set value × 3
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GTP
@GTP,3,1,3,1,0,0,0,0
Getting the set test pattern.
OUT1 and OUT2: VERTICAL GRAY SCALE at 3 pixels/frame scrolling
OUT3 and OUT4: test pattern is not output.
@STP,1,1,0
@STP,1,1,0
Setting OUT1 to VERTICAL COLOR BAR without scrolling.
－
MSD-72 series Command Guide
1 = VERTICAL COLOR BAR,
3 = VERTICAL GRAY SCALE,
5 = VERTICAL LAMP,
7 = 100% WHITE RASTER,
9 = 100% RED RASTER,
11 = 100% BLUE RASTER,
13 = OUTPUT FRAME,
15 = HORIZONTAL STRIPE,
17 = HORIZONTAL ZEBRA
33