IDK MSD-72 Series Command Reference Manual page 102

MSD-72 series Command Guide
@GZP / @SZP
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the display position of OUT1.
Setting Command
example Response
Description Setting bitmap 1 that is output from OUT1 to be displayed at TOP-LEFT.
Remarks
102
Display position
@GZP, ch
@GZP, ch, position_1, position_2, position_3, position_4
@SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2･･･)
@SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2･･･)
ch: Output channel
1 = OUT1 to 4 = OUT4
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
position_1-4: Display position
0 = CENTER [Default],
3 = TOP-RIGHT,
Getting commands: registered bitmap settings is returned in order.
bitmap_1-4: Bitmap number
0 = All bitmaps,
3 = Bitmap 3,
Only registered numbers can be specified.
@GZP,1
@GZP,1,1,1,1,1
Displaying at TOP-LEFT.
@SZP,1,1,1
@SZP,1,1,1
－
1 = TOP-LEFT,
4 = BOTTOM-RIGHT
1 = Bitmap 1,
4 = Bitmap 4
2 = BOTTOM-LEFT,
2 = Bitmap 2,