Table of Contents
Advertisement
4.2.24
Network communication
In order for your plotter to be able to communicate well with your local network, some settings have to be
made. Please contact your system administrator for all necessary information.
4.2.24.1 TCP/IP Address
Set the IP address of the cutter.
TCP/IP Address
192.162.001.199
How to change the IP address
Step 1 :
Select the number you want to change with the
Step 2 :
Change the number with the up down keys.
Step 3 :
Press the [ ] key to accept the change.
4.2.24.2 SubnetMask
Set the SubnetMask of the cutter.
SubnetMask
255.255.255.0
How to change the SubnetMask
Step 1 :
Select the number you want to change with the
Step 2 :
Change the number with the up down keys.
Step 3 :
Press the [ ] key to accept the change.
T C P / I P A d d r e s s
1 9 2 . 1 6 2 . 0 0 1 . 1 9 9
< - >
S a v e :
C h a n g e :
Set the IP address of the cutter. The IP address should be
chosen in between the following range:
xxx.yyy.zzz.www
x:
1-223
y:
0-255
z:
0-255
w: 0-254
S u b n e t M a s k
2 5 5 . 2 5 5 . 2 5 5 . 0
< - >
S a v e :
C h a n g e :
Set the SubnetMask of the cutter between
000.000.000.000 - 255.255.255.252
57
User's Guide SC-PRO Cutting Plotter
CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL
keys.
keys.
AP-75280 – Rev. 1.1
Advertisement
Table of Contents
