Chapter 4 Maintenance
5
Wipe off any ink on the flushing unit or the shutter.
• Wipe off the ink using a clean stick soaked in washing liquid. Wipe it off properly so that there is no
residual washing liquid.
• If the surface of the flushing filter has become fluff, wipe it using a clean stick soaked in washing
liquid.
• If the dirt is severe or hardened, replace the flushing filter.
6
Once the cleaning is complete, press the [ENTER] key.
• After the initial operation, the display returns to Step 1.
Washing the Ink Discharge Passage
Wash the ink discharge passage periodically to prevent ink from hardening and clogging inside it.
1
Press the [MAINT.] key in LOCAL.
2
Press
3
Press the [ENTER] key.
• Carriage moves onto the platen.
• Repeat the dry suction operation until the washing is complete.
4-12
Flushing filter
Flushing unit
CARRIAGE OUT
to select [DISWAY WASH].
DISWAY WASH
DISWAY WASH
COMPLETED (NEXT)
Shutter
"Flushing Filter" (P. 4-42)
[ENT]
[ENT]
[ENT]