Adjusting The Bidirectional Print Drop Position; Correcting The Drop Position - MIMAKI JFX200-2513EX Operation Manual

Adjusting the Bidirectional Print
Drop Position
If you change the printing conditions (such as media thickness and head height), do the following to correct
the ink drop position for bidirectional printing (Bi) to acquire the proper printing results:

Correcting the Drop Position

1
Set the media and set the print origin.
• "Setting up the Media" (P. 2-5)
2
In LOCAL, press the [ADJUST] key twice.
3
Press the [ENTER] key.
4
Press
• Available settings: Y300dpi/Y600dpi/Y1200dpi
• Make the correction for all the resolutions.
5
Press the [ENTER] key.
6
Press the [ENTER] key to start pattern print.
• The test pattern is printed. (They are called pattern 1, 2, 3... in the order in which they were
printed)
DROP.POScorrect
DROP.POScorrect
: Y300 dpi
to select the resolution.
DROP.POScorrect
: Y600 dpi
DROP.POScorrect
PRINT START
**PRINT**
PLEASE WAIT
Chapter 3 Convenient Usage
[ENT]
[ENT]
3
3-9