Ionizer Settings - MIMAKI JFX200-2513EX Operation Manual

Chapter 3 Convenient Usage

Ionizer Settings

Set the operations when the optional ionizer is installed.
• These settings are not displayed if the optional ionizer is not installed. If this setting is not displayed even
though the ionizer is installed, contact your local distributor, or our sales office or call center.
1
Press the [FUNCTION] key in LOCAL.
2
Press
3
Press the [ENTER] key.
4
Press
5
Press the [ENTER] key.
6
Press
• ON:
For normal printing, the ionizer is turned on before printing starts and when printing is in process,
and static electricity is removed. For reverse printing, static electricity is removed before printing.
The ionizer power is turned on when shifting to [VIEW].
• OFF:
Static electricity is removed.
7
Press the [ENTER] key.
8
Press the [END] key several times to end the operation.
3-20
FUNCTION
VIEW
to select [SETUP].
FUNCTION
SETUP
SETUP
DROP.POScorrect
to select [IONIZER].
SETUP
IONIZER
IONIZER
: ON
to select the value to be set.
IONIZER
: OFF
SETUP
IONIZER
[ENT]
[ENT]
[ENT]
[ENT]
[ENT]