Washing Of Head Nozzle - MIMAKI JFX200-2513EX Operation Manual

Washing of head nozzle

Wash the head nozzle to prevent them from getting clogged due to the hardened ink.
Check these items in advance
1
Press the [MAINT.] key in LOCAL.
2
Press
3
Press the [ENTER] key.
• Carriage moves.
• [COMPLETED (NEXT): ENT] is displayed on the screen until the cleaning work of wiper is
complete. Press the [ENTER] key after Step 4 is complete.
If you press the [ENTER] key before the cleaning is complete, the machine moves to the next
washing step.
4
Clean the wiper and the bracket.
(1) Open the right maintenance cover, hold the protrusions at both the ends of the wiper and pull
it out.
(2) Use a clean stick soaked in washing liquid.
• Wipe it off properly so that there is no residual washing liquid.
(3) Hold the wiper by the protrusions at both the ends and push it back to the original position.
Is [INK END] displayed?
• The ink is absorbed during washing. If the ink end is detected at this
time, washing cannot be performed.
• Replace the ink bottle with another one for which ink end has not
been detected.
CARRIAGE OUT
to select [NOZZLE WASH].
NOZZLE WASH
WIPER CLEANING
COMPLETED (NEXT)
Chapter 4 Maintenance
[ENT]
[ENT]
[ENT]
Protrusion
4
4-19