Usage Restrictions; User Restrictions; Area Restrictions - MIMAKI JFX200-2513EX Operation Manual

Chapter 1 Before Use

Usage Restrictions

Usage Restrictions

This machine can be dangerous due to parts that move at high speeds, parts with high temperature and UV
curing units. This machine is to be used only by those having complete understanding of dangers associated
with these parts.

User Restrictions

This machine should only be operated by the trainees of our safety education program or those who have
been trained by such a trainee.

Area Restrictions

• Only adequately trained and versed individuals are allowed to come closer to the equipment. Set area
restrictions within the range shown in the following figure. As for the method of area restriction, the
machine should be installed in a dedicated room, and it should be enclosed for everyone to understand
that it is a danger zone.
• The danger zone should be prohibited for everyone except the trainees of our safety education program
or those who have been trained by such a trainee. If an untrained person enters the restricted area while
the machine is in operation, there is a risk of accidental contact with the Y-bar that is in the process of
printing, resulting in injury.
• Follow EN ISO23857 standards when securing the area with safety trellis.
• When installing the setup in a dedicated room, install locks and interlocks on the door of the room, and
lastly conduct risk assessment at the installation site before use.
1000 mm
or more
1-2
1000 mm or more
1000 mm or more
6400 mm or more
1000 mm
or more