Washing The Ink Discharge Passage - MIMAKI TS500P-3200 Operation Manual

Chapter 4 Maintenance

Washing the Ink Discharge Passage

Wash the ink discharge passage on a regular basis (once
every 2 - 3 months) to prevent ink coagulation from
clogging the passage.
1
Press the
(MAINT) in LOCAL.
• The Maintenance menu appears.
2
Press
and press the
• The carriage moves onto the platen.
• Dry suction operation is performed repeatedly
until the washing work is completed.
3
Open the lower part of the right side front
cover.
(1) Remove the screws of the lower part of the
right side front cover (for two positions).
(2) Hold the upper of the lower part of the right
side front cover and pull it to the front.
• Open the lower part of the right side front cover
with the supplied screwdriver.
Lower part of the right
side front cover
4-10
key,and then press the
to select "Disway Wash",
key.
Carriage
Screw
4
Suction the cleaning solution into a
syringe and squirt about three syringes
worth of solution into each cap.
5
Close the lower part of the right side front
cover and press the
• After running a dry suction for a certain period of
time?the screen returns to step1.
key.