Setting Nozzle Surface Cleaning Frequency - MIMAKI JFX200-2513EX Operation Manual

Setting Nozzle Surface Cleaning
Frequency
This function automatically cleans the nozzle face of the head and removes the ink droplets clinging to the
nozzle face before or during printing.
1
Press the [FUNCTION] key in LOCAL.
2
Press
3
Press the [ENTER] key.
4
Press
5
Press the [ENTER] key.
6
Press
• When you select "PAGE" in [INTERVAL WIPING], once the set number of prints is complete, the
head nozzle is cleaned automatically before the next print starts.
• When you select "TIME" in [INTERVAL WIPING], the head nozzle is cleaned automatically once
the print time exceeds the set time.
• If you do not want to set [INTERVAL WIPING], select "OFF" and proceed to Step 9.
7
Press the [ENTER] key.
8
Press
• Available settings (PAGE): 1 to 100 pages
• Available settings (TIME): 3 to 50 min
9
Press the [ENTER] key.
FUNCTION
VIEW
to select [SETUP].
FUNCTION
SETUP
SETUP
DROP.POScorrect
and select [INTERVAL WIPING].
SETUP
INTERVAL WIPING
SETUP
INTERVAL WIPING
to select the type of interval wiping.
INTERVAL WIPING
: PAGE
to set wiping interval.
INTERVAL
=
Chapter 3 Convenient Usage
[ENT]
[ENT]
[ENT]
[ENT]
[ENT]
1 page
3
3-23