External Stop I/F - MIMAKI JFX200-2513EX Operation Manual
Hide thumbs
Also See for JFX200-2513EX:
- Safety precautions (28 pages) ,
- Requests for daily care and maintenance (29 pages) ,
- Print manual (28 pages)
Table of Contents
Advertisement
9
Press the [END] key several times to end the operation.
• To reflect the new network settings, turn the power off and back on.
External Stop I/F
In this machine, you can connect External Stop I/F to the I/F in the figure below (SMP-02V-BC).
External Stop I/F
(SMP-02V-BC)
Printer side
Control circuit board
• Arrange for a connector (SMR-02V-B).
External Stop I/F specifications: b-contact (Normal Close)
• Never connect the power source of External Stop I/F anywhere except the sensor line.
External Stop I/F Settings
You can set the operation for when a stop sensor is connected to the External Stop I/F.
1
Press the [FUNCTION] key in LOCAL.
2
Press
3
Press the [ENTER] key.
SMP-02V-BC
FUNCTION
VIEW
to select [MACHINE SETUP].
FUNCTION
MACHINE SETUP
MACHINE SETUP
AUTO Power-off
Chapter 3 Convenient Usage
Area sensor or the like
External Stop I/F
SMR-02V-B
[ENT]
[ENT]
[ENT]
b-contact
3-31
3
Advertisement
Table of Contents
Troubleshooting
