Table of Contents
Advertisement
Before washing ink discharge passage
Before washing ink discharge passage ([PUMP TUBE WASH], [NOZZLE PROTECT] (firmware Ver. 3.30 or
later)), it is necessary that maintenance washing liquid has been filled in the tube.
• When the following messages are indicated, check the waste ink tank, and then operate it, referring to
P.5-40 "If Waste ink tank confirming message is displayed" according to the situation.
Filling Cleaning solution
1
Select [HD.MAINTENANCE] of the maintenance menu.
(1) Press the
(2) Select [MAINTENANCE] by pressing the
(3) Select [HD.MAINTENANCE] by pressing the
(4) Press the
2
Select [MaintWashLiquid] by pressing the
keys.
3
Press the
4
Press the
• Proceed to the step 6 when a normal cartridge has been set.
5
Set a cleaning solution cartridge.
6
Press the
• Filling of the cleaning solution is started.
5-8
Downloaded From ManualsPrinter.com Manuals
C o n f i r m a w a s t e t a n k
C o n t i n u e <
> E x c h a n g e
key in the local mode.
key.
key.
key.
key.
C o n f i r m a w a s t e t a n k
E x c h a n g e
:
e
keys then press the
keys.
HD . MA I N T ENANCE
Ma i n t Wa s h L i q u i d < e n t >
Ma i n t Wa s h L i q u i d
F I L L I NG UP
Ma i n t Wa s h L i q u i d
CAR T R I DGE
When "END" is indicated :
The cleaning solution is not left. Replace
it with a new cleaning solution cartridge.
When an abnormal condition is
indicated :
The cartridge that has been set is not a
cleaning solution cartridge.
Ma i n t Wa s h L i q u i d
F I L L I NG UP S T AR T :
n t
key.
< e n t >
:
n o n e
e
n t
Advertisement
Table of Contents
