Carriage; Capping Station; Stop Switch - MIMAKI JFX200-2513EX Operation Manual

Carriage

The carriage is provided with the heads for printing and LED UV unit.
• Do not look at the light emitted from the LED UV with a naked eye when lit.
• Do not touch the LED UV unit when the LED is lit or just after it is set off. You may suffer serious burns, as
the unit is very hot.

Capping Station

• When cleaning the inside of the capping station, be sure to wear the included safety glasses and gloves.
Otherwise, the ink may get into your eyes.
The capping station consists of parts such as ink caps and the wipers necessary for maintenance of the
heads.
The ink cap prevents the nozzles in the heads from drying up.
The wiper is used for head cleaning.
The wiper is a consumable good. If the wiper is deformed or the media is stained, replace the wiper with a
new one.
"Replacing the wiper" (P. 4-32)

Stop Switch

Press the switch when you want to stop the machine for security reasons.
LED UV unit
Chapter 1 Before Use
1-13
1