Using Function Menu To Change The Print Origin - MIMAKI JFX200-2513EX Operation Manual

Using FUNCTION menu to Change the Print Origin

When setting an exact origin, set the X and Y coordinates of the origin from the FUNCTION menu.
When the origin is set by using this option, the set value becomes the point of origin (0.0).
1
Press the [FUNCTION] key in LOCAL.
2
Press
• The screen changes to the X-axis offset value setup screen.
3
Press
• Set X-axis origin.
4
Press the [ENTER] key.
5
Press
6
Press
• Set Y-axis origin.
7
Press the [ENTER] key.
8
Press the [END] key several times to end the operation.
• The set origin is not cleared even when the power is turned off.
FUNCTION
VIEW
and select [ORIGIN], and press the [ENTER] key twice.
ORIGIN
X OFFS:
to enter the numerical value.
ORIGIN
X OFFS:
ORIGIN
SELECT: X OFFSET
to select the [Y offset], and press the [ENTER] key.
ORIGIN
SELECT: Y OFFSET
to enter the numerical value.
ORIGIN
Y OFFSET:
ORIGIN
SELECT: Y OFFSET
Chapter 3 Convenient Usage
[ENT]
1300 mm
1200 mm
1300 mm
1290 mm
2500 mm
2090 mm
3
3-3