Maintenance Of Machine Exterior; Mbis Maintenance - MIMAKI JFX200-2513EX Operation Manual

Maintenance of Machine Exterior

Depending on the usage environment, trash and dust may stick to the exterior of the main unit. To prevent
dust from entering the head moving part, soak a soft piece of cloth in water, wring it tightly and then wipe off
the dust.
Table Maintenance
If there is dirt or ink adhering to the table, wipe it off with a cloth soaked in ethanol.
• If the ink is left stuck to the table for a long time, it becomes difficult to remove it using ethanol.
• The ink may stick to the vacuum hole of the table surface and clog it. Remove the ink from the vacuum
hole as and when necessary. When removing the ink, do not leave fragments of hardened ink on the table
surface.

MBIS maintenance

Please replace the Bottle Wiping Filter (PN: SPC-0820) if it gets dirty.
Chapter 4 Maintenance
4-3
4