Warning/Error Message; Warning Message - MIMAKI JFX200-2513EX Operation Manual

Chapter 5 Troubleshooting

Warning/Error Message

When an abnormality occurs, the buzzer rings and the display shows a corresponding message.
Take measures according to the message.

Warning message

Errors when performing operations
Message
CAN'T OPERATE
: INK ERROR
CAN'T OPERATE
: DATA REMAIN
Message displayed in LOCAL
Message
<LOCAL>
CAN'T PRINT/CART. [ENT]
<LOCAL>
Check waste ink [MNT]
<LOCAL>
Replace a WIPER [MNT]
<LOCAL>
DATA REMAIN
<LOCAL>
WATER LACK
<LOCAL>
REFILL WATER
<LOCAL>
UV LAMP TEMP. HIGH
<LOCAL>
NEGATIVE PRESSURE
<LOCAL>
POSITIVE PRESSURE
5-8
Cause
An ink error occurred.
Data is being received.
Cause
Multiple ink errors
(unusable ink).
Ink supply (printing,
cleaning) cannot be
performed.
Waste ink tank is nearly full.
Time to replace the wiper in
the capping station with a
new one.
(The wiping count has
reached the specified
value)
The data has been
received.
Water in the cooling water
tank is low.
Water in the cooling water
tank has been low for more
than seven days.
LED lamp temperature is
high.
The value of negative
pressure sensor is
abnormal.
The value of positive
pressure sensor is
abnormal.
Solution
• Check the ink bottle of the supply
path corresponding to the indicated
color.
• Clear the data.
"Deleting the Received Data
(Data Clear)" (P. 2-18)
Solution
• Press the [ENTER] key to check
the ink bottle generating the error
and the error details. Replace the
ink bottle with a usable one.
• Check the waste ink tank.
• Press the [MAINT.] key and
replace the wiper with a new one.
"Replacing the wiper" (P. 4-32)
• Press the [REMOTE] key to
perform printing.
Or, clear the data.
"Deleting the Received Data
(Data Clear)" (P. 2-18)
• Refill the coolant.
Refilling the Coolant
• Refill the coolant.
Refilling the Coolant
• Online printing cannot be
performed while this warning is
displayed.
• Wait until the temperature lowers
and the message disappears.
• Adjust the pressure.
"If pressure abnormality
occurs" (P. 5-6)
• If the pressure cannot be adjusted
to a normal value or if the message
is displayed even after executing
this step, contact your local
distributor, or our sales office or
call center.