Work Change Settings - MIMAKI JFX200-2513EX Operation Manual

WORK CHANGE Settings

Set whether to return to LOCAL mode or keep the REMOTE mode after online plotting is complete.
1
Press the [FUNCTION] key in LOCAL.
2
Press
3
Press the [ENTER] key.
4
Press
5
Press the [ENTER] key.
6
Press
• OFF:
REMOTE mode is maintained after online plotting (When the next drawing data is received, it will
be overwritten.)
• ON:
Y-bar is retracted after online plotting and the machine returns to LOCAL mode.
• HOST:
If you specify the "Print Count" to two or more on the RasterLink6 screen, the Y-bar is retracted
after each print is completed and the machine returns to LOCAL mode.
• The position where the Y-bar is retracted is the position set with
Position" (P. 2-18).
7
Press the [ENTER] key.
8
Press the [END] key several times to end the operation.
FUNCTION
VIEW
to select [SETUP].
FUNCTION
SETUP
SETUP
DROP.POScorrect
to select [WORK CHANGE].
SETUP
WORK CHANGE
WORK CHANGE
: OFF
to select the value to be set.
WORK CHANGE
: ON
SETUP
WORK CHANGE
Chapter 3 Convenient Usage
[ENT]
[ENT]
[ENT]
[ENT]
"Setting the VIEW
[ENT]
3
3-19