Cleaning The Ncu - MIMAKI JFX200-2513EX Operation Manual

Chapter 4 Maintenance

Cleaning the NCU

Ink and dust adhere to the NCU.
The NCU cannot operate normally if there is ink or dust adhering to it.
1
Press the [MAINT.] key in LOCAL.
2
Press the [ENTER] key.
3
Press
4
Press the [ENTER] key.
• Carriage moves onto the table.
5
Wipe off any ink or dust adhering to the NCU.
• Wipe the inside and the outside with a clean stick (SPC-0421) soaked in washing liquid.
• Wipe it off properly so that there is no residual washing liquid.
6
Once the cleaning is complete, press the [ENTER] key.
• After the initial operation, the display returns to Step 1.
4-10
CARRIAGE OUT
MOVE POSITION
: STATION MAINT.
to select [STATION MAINT.].
MOVE POSITION
: STATION MAINT.
Moving carriage
[ENT]
NCU