Head Gap Value; Registering The Head Gap Value - MIMAKI JFX200-2513EX Operation Manual

Chapter 3 Convenient Usage

HEAD GAP Value

Set the head gap (height from media to head nozzle surface).
When the head is to be moved onto the platen for operations such as printing or maintenance, it moves while
keeping the head gap at the pre-set value.
The upper limit of head gap varies depending on the thickness of the media.
Available settings: [1.2 mm to 3.0 mm] (per 0.1 mm/default: 1.5 mm)

Registering the Head Gap Value

Perform the following operations when you want to register the currently set head gap value.
1
Press the [FUNCTION] key in LOCAL.
2
Press
3
Press the [ENTER] key.
4
Press
5
Press the [ENTER] key.
6
Press
• Available settings: 1.2 to 3.0 mm
7
Press the [ENTER] key.
8
To end the operation, press the [ENTER] key several times.
• An incorrect head gap value may deteriorate the print quality, due to large drops of ink dropped on
the media in some cases or other such issues.
3-6
FUNCTION
VIEW
to select the [HEAD HEIGHT].
FUNCTION
HEAD HEIGHT
HEAD HEIGHT
MEDIA THICKNESS
to select the [HEAD GAP].
SETUP
HEAD GAP
HEAD GAP
=
to set the head gap value.
HEAD GAP
=
SETUP
HEAD GAP
[ENT]
[ENT]
[ENT]
[ENT]
2.0 mm
3.0 mm
[ENT]