Ink Specifications - MIMAKI JFX200-2513EX Operation Manual

Item
Installation environment
Weight
External dimensions
*1. 73.5 db (A), Operation conditions: High-speed scanning, blower is ON: According to clause 1.7.4.2 of Machinery Directive 2006/42/EC.

Ink specifications

Item
Form
Color
Ink capacity
Shelf life
Storage Storage
temperature
Transportation
• Do not use any ink other than the MIMAKI designated ink.
Also, do not disassemble the ink bottles or refill or replenish their ink.
• Ink could freeze if left in a cold place for a long period of time.
If the ink freezes, thaw it at room temperature (25°C) for at least three hours before using.
However, if you use thawed ink, the print quality deteriorates due to the deterioration of ink. Store ink in an
environment where it will not freeze.
Allowable temperature
Relative humidity
Accuracy guaranteed
temperature
Temperature gradient
Dust
1 L Ink bottle
Black ink
Cyan ink
Magenta ink
Yellow ink
White ink
Light cyan (LUS150, LH100 ink only)
Light magenta (LUS150, LH100 ink only)
ClearInk (LH100 ink, LUS 120 ink)
Primer ink (PR-200)
1 liter
The expiration date is printed on the ink bottle.
Should be used within three months after opening regardless of the expiration
date.
5 to 30°C (storage at 30°C is permitted for a period of 1 month or less)
1 to 60°C (storage permitted only for 120 hours or less if the temperature is
60°C and one month or less if the temperature is 40°C)
Specifications
15°C to 30°C (59°F to 86°F)
35 to 65% Rh (No condensation)
18°C to 25°C (64.4°F to 77°F)
±10°C/h or less
3
0.15 mg/m (equivalent to normal office level)
Approximately 600kg
4400 mm (W) × 2450 mm (D) × 1250 mm (H) (including
protrusions)
Specifications
Chapter 6 Appendix
6-3
6