Replacement Of Consumables; Replacing The Wiper - MIMAKI JFX200-2513EX Operation Manual

Chapter 4 Maintenance

Replacement of Consumables

Replacing the wiper

The wiper is a consumable good. If the message on the right is displayed, replace the wiper as soon as
possible.
Also, wipe the ink sticking to the lower surface of the slider.
• Cleaning wipers are sold separately. Purchase one from your local distributor or our sales office.
1
When the message is displayed, press the [ENTER] key.
2
Press the [ENTER] key.
• Carriage moves onto the table.
• [COMPLETED :ENT] is displayed on the screen until the replacement work is completed.
Press the [ENTER] key after the work up to Step 4 is complete.
3
Remove the wiper
• Pull out the wiper by holding the protrusions at both the ends.
4-32
<LOCAL>
REPLACE WIPER [MNT]
REPLACE WIPER
EXECUTE [ENT]
REPLACE WIPER
COMPLETED [ENT]
Protrusion