Power Supply; Power Cable - MIMAKI JFX200-2513EX Operation Manual

For Safe Operation
• The included power cable set is for use with this machine only. It cannot be used with other electronic
devices. Also, please do not use any power cable set other than the one provided with this machine. Doing
so may cause fire or electric shocks.
• Do not use extension cords. Doing so may cause fire or electric shocks.
• If any kind of metal touches the edge of the power plug, it may cause fire or electric shocks.
• Do not overload the electrical socket. Doing so may cause fire or electric shocks.
• Do not use this machine when the power cable appears to be damaged or has exposed or broken core.
Continuing use in this state may cause fire or electric shocks. Please request the service center for a cable
replacement.
• Do not handle the power plug with wet hands. Doing so may cause electric shocks.
• Make sure to hold the power plug properly when removing it. Pulling the power cable can damage it and
cause fire or electric shocks.
• Do not use any voltage value other than the one indicated. Doing so may cause fire or electric shocks.
• Do not use any power frequency other than the one indicated. Doing so may cause fire or electric shocks.
• Use this machine with the indicated power specifications. Also, make sure you plug the power cable into a
grounded outlet. Doing so may cause fire or electric shocks.
• Be careful not to damage, break or treat the power cable. Also do not place any heavy object on the power
cable, or heat or pull it. Doing so can cause it to break, resulting in fire or electric shocks.
• Only those familiar with the operation procedures of the machine should activate the main power switch.
l Power Supply
• Make sure the breaker is always on.
l Power Cable
• Use the included power cable.
l Disposal
• If you want to dispose of this machine, please contact your local distributor or service center. If you want to
dispose the machine by yourself, please contact an industrial waste processor.
• Give the waste ink or the ink bottles that you no longer to your local distributor or service center. If you
want to dispose of them by yourself, please contact an industrial waste processor or dispose them
according to local regulations.
l Handling Vacuum
• Never disassemble or modify the vacuum. Also, do not touch the relief valve (pressure regulating valve) or
block the vacuum exhaust port. This can cause a decrease in suction force, heat generation or
malfunctions. (The vacuum is directly below the table.)
xii