Machine Settings; Auto Power-Off Settings - MIMAKI JFX200-2513EX Operation Manual

Machine Settings

These are various settings to help you use this machine comfortably.
The following settings can be configured for the machine.
Item
AUTO Power-off
"AUTO Power-off Settings" (P. 3-25)
TIME
"Time Settings" (P. 3-26)
UNIT TEMP.
"Unit
Settings" (P. 3-27)
LENGTH
KEY BUZZER
"Key Buzzer Settings" (P. 3-28)
LANGUAGE
"Language Settings" (P. 3-29)
NETWORK Configures the network.
"Network
Check IP ADDRESS
Settings" (P. 3-29)
Check MAC ADDRESS
DHCP
AutoIP
IP ADDRESS
DEFAULT GATEWAY
DNS ADDRESS
SUB NET MASK
External Stop I/F
"External Stop I/F" (P. 3-31)
RESET
"Resetting to Default Settings" (P. 3-38)
*1. Settable only when [DHCP] and [AutoIP] are both off

AUTO Power-off Settings

If are no operations or a set time, the power turns off automatically.
1
Press the [FUNCTION] key in LOCAL.
Set value
NONE/10 to 30
to 600 min
+4 h to -20 h
(Japan time)
°C (Celsius)/°F
(Fahrenheit)
mm/inch
ON/OFF
English
ニホンゴ
Deutsch
Français
Español
Italiano
Português
Displays the IP address the machine is currently using.
Displays the MAC address the machine is currently using.
ON/OFF
ON/OFF
*1
Set the IP address used by this machine.
*1
Sets the default gateway to be used.
*1
Sets the DNS address used by this machine.
*1
Sets the sub net mask to be used.
ON/OFF
-
FUNCTION
VIEW
Chapter 3 Convenient Usage
Details
If are no operations or a set time, the power
turns off automatically.
Sets the current date and time.
Sets the display unit for temperature.
Sets the display units for length and area.
Sets the buzzer sound for when a key is
pressed.
Changes the display language.
If set to "ON", an IP address received from
the DHCP server is used.
If set to "ON", the IP address to be used is
set according to the AutoIP protocol.
However, if DHCP is ON, DHCP takes
priority.
If you change the External Stop I/F in
REMOTE mode, a warning is displayed,
and the machine will switch to LOCAL
mode.
Returns all setting items to default values.
[ENT]
3
3-25