Setting The Cleaning Interval - MIMAKI JFX200-2513EX Operation Manual

6
Press the [END] key several times to end the operation.

Setting the Cleaning Interval

Cleaning type and the interval between each cleaning operation are set.
1
Select [AUTO MAINT.] of the MAINTENANCE menu.
(1) Press the [FUNCTION] key in LOCAL.
(2) Press
(3) Press
(4) Press the [ENTER] key.
2
Press
3
Press the [ENTER] key.
4
Press
• Available settings: OFF, Lv.1, Lv.2, Lv.3
• As the level increases, the interval between each operation becomes shorter.
5
Press the [ENTER] key.
• When you set a value other than "OFF" in Step 4, the cleaning type selection screen is displayed.
6
Press
• Available settings: NORMAL, SOFT, HARD
7
Press the [ENTER] key.
8
Press the [END] key several times to end the operation.
to select [MAINTENANCE], and press the [ENTER] key.
to select [AUTO MAINT.].
to select [CLEANING].
AUTO MAINT.
CLEANING
CLEANING
: Lv. 1
to set the interval between each cleaning operation.
CLEANING
: Lv. 2
TYPE
: NORMAL
to select a cleaning type.
TYPE
: SOFT
AUTO MAINT.
CLEANING
Chapter 4 Maintenance
[ENT]
[ENT]
4
4-31