Chapter 3 Convenient Usage
Changing the Point of Origin
The factory setting of point of Origin can be changed.
It can be changed in one of the two ways.
Setting the point of origin by using
Using JOG Keys to Change the Print Origin
1
Press
• The screen changes to [ORIGIN SETUP].
• A red "● ( light pointer mark)" appears on the table or media.
2
Press
• Move the light pointer mark to the position set as the new origin.
3
Once the print origin has been determined, press the [ENTER] key.
• The origin has changed.
• The origin set by using the JOG keys is cleared when the power is turned off.
3-2
Changing with the JOG keys
Media
Light pointer mark
New point of origin
Old point of origin
JOG keys
in LOCAL.
ORIGIN SETUP
0.0
to move the light pointer mark.
ORIGIN SETUP
500.0
Point of origin
(front-back)
Changing from "ORIGIN" in the
[FUNCTION] menu
Table
600.0
Point of origin
(left-right)
** ORIGIN **