Sav (Save Command) - Keysight 53147A Operating And Programming Manual

3 Programming

*SAV (Save Command)

*SAV <NRf> | <non-decimal numeric>
COMMAND
This command stores the current state of the instrument in register 0 of local
non-volatile memory when *RCL or is executed or Recall is selected from the
menu using the front-panel controls.
0 to 8
<NRF> RANGE
1
<NRF>
RESOLUTION
– The following states are saved:
COMMENTS
– The following front-panel settings are saved (these settings have no command
Shift + Menu (SAVE > 0 through 8)
RELATED
FRONT-PANEL
KEYS
260
:DISPlay[:WINDow]:BACKground:[:STATe]
:INITiate:CONTinous
[:SENSe]:AVERage[:STATe]
[:SENSe]:AVERage:COUNt
[:SENSe]:CORRection:CSET:SELect
[:SENSe]:CORRection:CSET:STATe
[:SENSe]:FILTer:FM:AUTO
[:SENSe]:FREQuency:OFFset:STATe
[:SENSe]:FREQuency:RESolution
[:SENSe]:FREQuency:TRACking
[:SENSe]:FUNCtion[:ON]
[:SENSe]:POWer:AC:REFerence
[:SENSe]:POWer:AC:REFerence:STATe
[:SENSe]:ROSCillator:SOURce
:TRIGger:[:SEQuence]:HOLDoff
*DDT
equivalents):
Rel Pwr (Relative Power) valueRel Freq (Relative Frequency) value
Rel Pwr (Relative Power) stateRel Freq (Relative Frequency) state
Power Display Units
Keysight 53147A/148A/149A Operating and Programming Guide