Description Of The Microwave Frequency Counter/Power Meter/Dvm - Keysight 53147A Operating And Programming Manual

In This Guide
Description of the Microwave Frequency Counter/Power Meter/
DVM
The Keysight 53147A, 53148A, and 53149A are capable of measuring frequencies
from 10 Hz to 125 MHz on Channel 1 and from 50 MHz to 20 GHz (53147A), 26.5
GHz (53148A), and 46 GHz (53149A) on Channel 2. These instruments are also
capable of measuring power (the power and frequency ranges for power
measurement are dependent on the power-sensor model used) and DC voltages
up to ±50 VDC. All three instruments have a maximum frequency resolution of
1 Hz.
The Keysight 53147A/148A/149A provide GPIB and RS-232 serial interfaces and
are suitable for field, bench-top, and ATE operation.
The basic measurement functions of the Keysight 53147A/148A/149A includes
Frequency, Relative Frequency, Frequency Offset, Power, Power Offset, Relative
Power, and DC voltages. All of these features are accessible from the front panel
and over the GPIB and RS-232 interfaces.
The Keysight 53147A/148A/149A includes the following additional measurement
functions and features that are designed specifically for manufacturing and
service applications:
– 1, 2, 5, and 10 MHz external reference capability
– Optional high-stability oven oscillator for high-accuracy needs and lengthened
– Frequency and power offset capabilities for relative measurements
– SCPI programming capability
– Battery and dc input option for operation in locations where AC power is
– Optional soft carrying case for safe transportation and mobile use
Programmable control is performed via a GPIB or an RS-232 serial interface. The
GPIB and RS-232 ports are standard for the Keysight 53147A, 53148A, and
53149A.
26
calibration cycles
unavailable
Keysight 53147A/148A/149A Operating and Programming Guide