[:Sense]:Function Subtree - Keysight 53147A Operating And Programming Manual

[:SENSe]:FUNCtion Subtree

This subtree controls the sensor functions.
[:SENSe]:FUNCtion[:OFF] . . . <sensor_function>[,<sensor_function>]
COMMAND
Sets or queries the sensor functions to be sensed by the instrument.
The <sensor_function> strings are:
– The query form of this command returns a comma-separated list of functions
QUERY
RESPONSE
– The string omits default nodes (XNONe) and uses short-form mnemonics. If
– *RST: "FREQ 2"
COMMENTS
– This command can be used to turn individual function(s) OFF without affecting
– If the optional channel specification is omitted from the <sensor_function>, a
Various
RELATED
FRONT-PANEL
KEYS
[:SENSe]:FUNCtion[:ON] . . . <sensor_function>[,<sensor_function>]
COMMAND
Selects the sensor functions to be sensed by the instrument.
Keysight 53147A/148A/149A Operating and Programming Guide
"[XNONe:]FREQuency [1 | 2]"
"[XNONe:]POWer"
"[XNONe:]VOLTage[:DC]"
that are OFF.
the channel specifier(s) are set to default value(s), no channel specifier is
returned in response. If the channel specifier(s) are not set to default value(s),
they are returned in the response with a single space separating the first
channel specifier from the function name.
For example:
– "FREQ" is returned for frequency on Channel 1.
– "FREQ 2" is returned for frequency on Channel 2.
other functions.
default channel selection is made. For Frequency and Power, the default is
Channel 2.
Programming 3
237