Table of Contents
Advertisement
3
Programming
Related Documentation
This section contains a list of documentation that relates to the use of the
Keysight 53147A/148A/149A. Additional information that may be useful is
contained in the following publications:
1 Beginner's Guide to SCPI (Keysight Part Number H2325-90002,
2 Beginner's Guide to SCPI, Barry Eppler (Hewlett-Packard Press,
3 Standard Commands for Programmable Instruments (SCPI),
4 The International Institute of Electrical Engineers and Electronic Engineers,
132
July 1990 Edition).
Addison-Wesley Publishing Co. 1991).
(latest version).
This standard is a guide for the selection of messages to be included in
programmable instrumentation. It is primarily intended for instrument firmware
engineers. However, you may find it useful if you are programming more than
one instrument that claims conformance to the SCPI standard. You can verify
the use of standard SCPI commands in different instruments.
To obtain a copy of this standard, contact:
SCPI Consortium
8380 Hercules, Suite P3
La Mesa, CA 91942 USA
Phone: (619) 697-8790
FAX: (619) 697-5955
IEEE Standard 488.1-1987, IEEE Standard Digital Interface for Programmable
Instrumentation.
This standard defines the technical details required to design and build a GPIB
(IEEE 488.1) interface. This standard contains electrical specifications and
information on protocol that is beyond the needs of most programmers.
However, it can be useful to clarify formal definitions of certain terms used in
related documents.
To obtain a copy of this standard, write to:
Institute of Electrical and Electronic Engineers Inc.
345 East 47th Street
New York, NY 10017 USA
Keysight 53147A/148A/149A Operating and Programming Guide
Advertisement
Table of Contents
