Suffixes; Table 3-6 Suffix Multipliers - Keysight 53147A Operating And Programming Manual

Suffixes

A suffix is the combination of suffix elements and multipliers that can
be used to interpret some <numeric value>. If a suffix is not specified,
the instrument assumes that <numeric value> is unscaled (that is, Volts, seconds,
etc.)
For example, the following two commands are equivalent:
Suffix Elements
Suffix elements, such as HZ (Hertz), S (seconds), V (volts), OHM (Ohms), PCT
(percent), and DEG (degrees) are allowed within this format.
Suffix Multipliers
Table 3-6
PCT and DEG).
Table 3-6
Definition
1E15
1E12
1E9
1E6
1E3
1E-3
1E-6
1E-9
1E-12
Keysight 53147A/148A/149A Operating and Programming Guide
OUTPUT 703;"FREQ:RES 1kHz"
OUTPUT 703;"FREQ:RES 1E+3"
lists the suffix multipliers that can be used with suffix elements (except
Suffix Multipliers
Mnemonic
PE
T
G
MA ( or M for OHM and HZ)
K
M (except for OHM and HZ)
U
N
P
Name
PETA
TERA
GIGA
MEGA
[a]
KILO
MILLI
[a]
MICRO
NANO
PICO
Programming 3
165