Table 3-2 Keysight 53147A/148A/149A Scpi Command Summary (Continued) - Keysight 53147A Operating And Programming Manual

Table 3-2 Keysight 53147A/148A/149A SCPI Command Summary (continued)
Keyword/Syntax Parameter Form
:FUNCtion
[:OFF] <sensor_function>[,<sensor_function>]
[:ON] <sensor_function>[,<sensor_function>]
:STATe? <sensor_function>
:POWer
:AC
:REFerence <numeric_value>
:STATe <Boolean>
:OFFset <Boolean>
:ROSCillator
:SOURce <character_program_data>
:STATus
:OPERation
:CONDition?
:ENABle <non-decimal numeric> | <NRf>
[:EVENt]?
:NTRansition <non-decimal numeric> | <NRf>
Keysight 53147A/148A/149A Operating and Programming Guide
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer"
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer"
INTernal | EXTernal
Std/New Comments
Std Subtree. Selects the <sensor_function>(s) to be
sensed by the instrument.
New Selects the <sensor_function>(s) to be turned
OFF.
Std Selects the <sensor_function> to be sensed by
the instrument.
Std Query that returns a Boolean value which
indicates whether the specified
<sensor_function> is ON or OFF.
Std Subtree. Configures the instrument for power
measurement on channel 2.
Std Sets a reference amplitude (in dB) for display of
power measurements.
Std Determines whether amplitude is measured in
absolute or relative mode.
Std Turns the Power Offset function on or off.
Std Subtree. Controls the reference oscillator.
Std Sets the selection of a reference timebase
(INTernal or EXTernal).
Std Subsystem. Controls the SCPI-defined
(Operation and Questionable) status-reporting
structures.
Std Subtree.
Std Query only. Queries the Operation Condition
Status Register.
Std Sets the Operation Event Status Enable Register.
Std Query only. Queries and then clears the
Std Operation Event Status Register. Sets and
queries the negative transition filter for the
Operation status reporting structure.
Programming 3
147