Table 3-2 Keysight 53147A/148A/149A Scpi Command Summary - Keysight 53147A Operating And Programming Manual

Table 3-2 Keysight 53147A/148A/149A SCPI Command Summary
Keyword/Syntax
:ABORt
:CALibration
[:ALL]
:AUTO
:DATA
:HEADer
:SECurity
:CODE
:STATe
:RCFactor
:ZERO
:AUTO
:CONFigure
:DISPlay
:ENABle
[:WINDow]
:BACKground
[:STATe]
:FETCh
:INITiate
:CONTinuous
[:IMMediate]
Keysight 53147A/148A/149A Operating and Programming Guide
Parameter Form
<character_data>
ONCE
<numeric_value1><numeric_value2>
<numeric_value3><string>
<Boolean>
<numeric_value>
<Boolean><numeric_value>
<numeric_value>
<character_data>
ONCE
<Boolean>
<Boolean>
<Boolean>
Std/New Comments
Std Event; no query. Resets the trigger system
and aborts any measurement in progress.
Places the trigger system in the IDLE state.
Std Subsystem. Controls the calibration of the
Power meter.
Zeros the power meter and calibrates it.
Calibrates the power meter.
Writes checksum and other data relating to
the calibration data.
Changes/sets the CAL:SECurity code.
Enables/disables access to calibration
memory. The <numeric_value> is the current
value of CAL:SECurity:CODE.
Corrects all power readings when calibration
tables are disabled.
Zeros the Power Meter.
Std See Measurement Instructions in this table.
Std Subsystem. Controls the selection and
presentation of textual information on the
display.
Std Controls whether or not the entire display is
visible.
New Turns the LCD display backlight ON or OFF.
Std See Measurement Instructions in this table.
Std Subsystem. Controls the initiation of
measurements.
Std Sets the instrument for continuously
initiated or user-initiated measurements.
Std Event; no query. Causes the instrument to
initiate and complete one full measurement
cycle.
Programming 3
143