Using The Clear And Reset/Local Keys; Acknowledging Messages - Keysight 53147A Operating And Programming Manual

Using the Clear and Reset/Local Keys

The Clear and Reset/Local keys have similar functions in the Menu and in other
front-panel-key function settings, but their effects vary with the instrument's state
and condition. In general, the Reset/Local key restores the setting that was in
effect when you entered the Menu or front- panel-key function, but it does not
close the Menu or the function-setting display. The Clear key also restores the
previous setting, but it closes the Menu or the front-panel-key function-setting
display at the same time.
If you press the Reset/Local key while the instrument is taking measurements, it
resets the current operation and forces the instrument to reacquire and
re-measure the signal.
Pressing the Reset/Local key while the instrument is in Remote Mode forces the
instrument into Local Mode and enables all of the front-panel controls.

Acknowledging Messages

When a message is displayed, press the Reset/Local key, the Clear key,
or the Enter key (after reading the message) to acknowledge it and erase
it from the display.
Keysight 53147A/148A/149A Operating and Programming Guide
Freq
Menu
Offset
Reset/ Resol
Local
On/Off
Shift Clear
Operating Your Instrument 2
75