Wai (Wait-To-Continue Command) - Keysight 53147A Operating And Programming Manual

Programming 3

*WAI (Wait-to-Continue Command)

*WAI
COMMENTS
This command prevents the instrument from executing any further commands or
queries until all pending operations are complete. The only way to cancel this
"holdoff" is by device clear, power-on, *RST, or *CLS.
See the section titled "Using the *WAI Command" on page 196 for an example
that uses this command.
None
RELATED
FRONT-PANEL
KEYS
Keysight 53147A/148A/149A Operating and Programming Guide 265