Table of Contents
Advertisement
– An unrecognized header was received. Unrecognized headers include incorrect
– A Group Execute Trigger (GET) was entered into the input buffer inside of an
Events that generate command errors do not generate execution errors,
device-specific errors, or query errors.
Execution Error
An <error number> in the range [
detected by the instrument's execution control block. The occurrence of any error
in this class causes the execution error bit (bit 4) in the Event Status Register to be
set. One of the following events has occurred:
– A <PROGRAM DATA> element following a header was evaluated by the
– A valid program message could not be properly executed due to some
Execution errors are reported by the instrument after rounding and expression
evaluation operations have been taken place. Rounding a numeric data element,
for example, is not reported as an execution error. Events that generate execution
errors do not generate command errors, device-specific errors, or query errors.
Device-Specific or Instrument-Specific Error
An <error number> in the range [
the instrument has detected an error that is not a command error,
a query error, or an execution error; some instrument operations did not properly
complete, possibly due to an abnormal hardware or firmware condition. These
codes are also used for self-test response errors.
The occurrence of any error in this class causes the device-specific error bit (bit 3)
in the Event Status Register to be set.
Keysight 53147A/148A/149A Operating and Programming Guide
instrument-specific headers and incorrect or unimplemented IEEE 488.2
Common Commands.
IEEE 488.2 program message.
instrument as outside of its legal input range or is otherwise inconsistent with
the instrument's capabilities.
instrument condition.
200 to
299] indicates that an error has been
–
–
300 to
399] or [+1 to +32767] indicates that
–
–
Programming
3
269
Advertisement
Table of Contents
