3
Programming
Query Error
An <error number> in the range [
control of the instrument has detected a problem with the message exchange
protocol. The occurrence of any error in this class causes the query-error bit (bit 2)
in the Event Status Register to be set. This means that one of the following
conditions exists:
– An attempt is being made to read data from the output queue when no output
– Data in the output queue was lost.
Error List
Table 3-17
53147A, 53148A, and 53149A.
270
is either present or pending.
lists and describes the error messages generated by the Keysight
Keysight 53147A/148A/149A Operating and Programming Guide
400 to
499] indicates that the output queue
–
–