:INPut Subsystem
This subsystem controls the characteristics of the instrument's input ports.
:INPut:FILTer:[:LPASs][:STATe] . . . <Boolean>
COMMAND
Sets or queries the state of the Channel 1 low-pass filter.
– Single ASCII-encoded byte, 0 or 1.
QUERY
RESPONSE
– A value of 0 indicates OFF; a value of 1 indicates ON.
*RST: OFF
COMMENT
Shift + Menu (CH1 LPF > OFF | ON)
RELATED
FRONT-PANEL
KEYS
Keysight 53147A/148A/149A Operating and Programming Guide
Programming
3
219