Ist? (Instrument Status); Opc (Operation Complete Command) - Keysight 53147A Operating And Programming Manual

Shift + Menu
RELATED
FRONT-PANEL
KEYS

*IST? (Instrument Status)

*IST?
COMMAND
Queries the current state of the parallel poll response (Instrument Status).
<NR1>
QUERY
RESPONSE
0-1
RANGE
None
RELATED
FRONT-PANEL
KEYS

*OPC (Operation Complete Command)

*OPC
COMMAND
This event command enables the OPC bit (bit 0) in the Standard Event Status
Register to be set when a triggered action is complete. See the section titled
"Standard Event Status Register"
Standard Event Status Register's Operation Complete bit.
This event command is "disabled" by *CLS, *RST, power-on, or upon the transition
of the measurement cycle from measuring to idle.
This event command has no query form.
See the section titled
an example that uses this command.
None
RELATED
FRONT-PANEL
KEYS
Keysight 53147A/148A/149A Operating and Programming Guide
on page 178 for a detailed description of the
"Using the *OPC Command to Assert SRQ"
Programming 3
on page 197 for
257