Status Reporting - Keysight 53147A Operating And Programming Manual

Status Reporting

The Keysight 53147A, 53148A, and 53149A status registers conform to the SCPI
and IEEE 488.2 standards.
Figure 3-12
This is a high level diagram that does not show all the registers that are contained
in each group. It is intended as a guide to the bits used in each of these register
groups to monitor the instrument's status. Note that a summary of the Standard
Status Structure Registers (defined by IEEE 488.2-1987) is shown in addition to
the Operation Status and Questionable Data/Signal Register groups.
Refer to the section titled
page 188 and the flowchart in
programming the status-reporting system.
Keysight 53147A/148A/149A Operating and Programming Guide
shows all of the status-register groups and queues in the instrument.
"Programming the Instrument for Status Reporting"
Figure 3-16
Programming
for detailed information on
3
on
173