Using The Selection Keys; Sequencing Through The Menu - Keysight 53147A Operating And Programming Manual

Using the Selection Keys

There are six Selection keys—four "arrow" keys, the Enter key, and the sign (+/–)
key. The functions of the arrow keys depend on the instrument's operating mode
(i.e., sequencing through choices in the Menu, numeric entry, state change, etc.).
This section describes how the Selection keys function in these different operating
modes.

Sequencing Through the Menu

To access the Menu, press the Shift key, and then press the Menu (Reset/Local)
key.
– Press the up- or down-arrow key to go forward to the next menu function or
– Press the right-arrow key to select a function. When you do this, the flashing
– Press the up- or down-arrow key to move through the list of available settings
– Press the Sign (+/–) key to change the sign of numeric values.
– Press the Enter key to accept the currently displayed setting and exit the
Keysight 53147A/148A/149A Operating and Programming Guide
Menu
Reset/
Local
Shift
Enter
back to the previous menu function. Pressing either of these keys repeatedly
cycles through the list of menu functions.
annunciator ( ) changes direction and the current setting flashes to indicate
that you can now use the up- and down-arrow keys to cycle through the
available settings.
for a function. Pressing either of these keys repeatedly cycles through the list
of settings.
Menu.
Operating Your Instrument 2
71