[:Sense]:Power Subtree - Keysight 53147A Operating And Programming Manual

[:SENSe]:POWer Subtree

This subtree controls the power-measurement function.
[:SENSe]:POWer:AC:REFerence . . . <numeric_value><power_units>
COMMAND
This command sets a reference amplitude (in dB) for display of power
measurements. It is intended for use as a measurement offset, so that a
measurement can be referenced to a known value.
–50 dBm to 10 dBm
RANGE
dB, dBm
UNITS
*RST: 0
COMMENT
Shift + Pwr Offset
RELATED
FRONT-PANEL
KEYS
[:SENSe]:POWer:AC:REFerence:STATe . . . <Boolean>
COMMAND
Determines whether amplitude is measured in absolute or relative mode. If STATe
is ON, amplitude is referenced to the value set in REFerence.
*RST: OFF
COMMENT
Power Meter Offset On/Off
RELATED
FRONT-PANEL
KEYS
Keysight 53147A/148A/149A Operating and Programming Guide
Programming 3
239