Group Execute Trigger (Get) - Keysight 53147A Operating And Programming Manual

3 Programming

Group Execute Trigger (GET)

GET
COMMAND
The full capability of the Group Execute Trigger IEEE 488.1 interface function is
implemented in the instrument. This function permits the instrument to have its
operation initiated over the Bus. In response to the IEEE 488.1 Group Execute
Trigger (GET) remote interface message (while the instrument is addressed to
listen), the instrument performs the action defined by the *DDT command (see
page 149).
None
RELATED
FRONT-PANEL
KEYS
216 Keysight 53147A/148A/149A Operating and Programming Guide