Table of Contents
Advertisement
3
Programming
Keysight 53147A/148A/149A SCPI Subsystem Commands
SCPI Subsystem commands include all measurement functions and
some general-purpose functions. SCPI Subsystem Commands use a hierarchy
relationship between keywords that is indicated by a colon (:). For example, in the
SYST:ERR? query, the ":" between SYST and ERR? indicates ERR? is subordinate
to SYST.
Table 3-2
by the command keyword. The table shows the Subsystem commands
hierarchical relationship, related parameters (if any), and any associated
information and comments.
Not all commands have a query form. Unless otherwise stated in
CAUTION
commands have both a command and a query form. Any command in the
table that is shown with a "
Std/New Column
The Std/New column in
to the SCPI standard. The "Std" commands operate as defined in the SCPI
standard and as defined in this guide.
The category of "New" consists of commands that could be:
– SCPI approved but are not yet in the SCPI manual
– Keysight approved and submitted for SCPI approval.
– Not approved at all.
The "New" commands operate as defined in this guide.
Parameter Form Column
Refer to the sections titled
Instrument for Remote Operation"
parameter types (such as <Boolean>, <NRf>, <arbitrary block>, etc.).
142
lists the SCPI Subsystem Commands in alphabetical order
?
Table 3-2
"Parameter Types"
Keysight 53147A/148A/149A Operating and Programming Guide
" at the end, is a "Query Only" command.
shows the status of the command with respect
on page 162 and
on page 151 for descriptions of the different
Table
3-2,
"Programming the
Advertisement
Table of Contents
