Installing Batteries - Keysight 53147A Operating And Programming Manual

C Using the Battery Option

Installing Batteries

To install batteries in the instrument, use the following procedure:
1 If you have not previously removed the battery sled from the instrument and
2 Position the battery sled so that the back (taller) end is to your left as shown in
296
the batteries from the sled, do so now (see
previous page).
Figure C-3.
2
1
5
1 Thumbscrews
2 Batteries
3 Battery terminals
Figure C-3 Removing and Installing Batteries
Keysight 53147A/148A/149A Operating and Programming Guide
3
3
4
4 Battery chamber
5 Battery sled
"Removing the Batteries" on the