3
Programming
:UNIT Subsystem
:UNIT:POWer . . . <character_program_data>
COMMAND
The UNIT subsystem sets the Power-Meter measurement units to Watts and %
(linear) or dBm and dB (logarithmic).
The UNIT:POWer and UNIT:POWer:RATio commands are coupled. Therefore, if:
COMMENT
– UNIT:POWer is set to DBM, then UNIT:POWer:RATio is dB.
– UNIT:POWer is set to W then UNIT:POWer:RATio is %.
Shift + dBm/W
RELATED
FRONT-PANEL
KEYS
252
Keysight 53147A/148A/149A Operating and Programming Guide