Table 3-2 Keysight 53147A/148A/149A Scpi Command Summary (Continued) - Keysight 53147A Operating And Programming Manual

3 Programming
Table 3-2 Keysight 53147A/148A/149A SCPI Command Summary (continued)
Keyword/Syntax Parameter Form
[:SENSe]
:AVERage
[:STATe] <Boolean>
:COUNt <numeric_value>
:CORRection
:CSET
:SELect <character_data>
:STATe <Boolean>
:DATA? <data_handle>
:FILTer
:FM
:AUTO <Boolean>
[:SENSe] (cont.)
:FREQuency
:OFFSet <numeric_value>[frequency unit]
:STATe <Boolean>
146
CORR1 | CORR2 . . . CORR9
"[XNONe]FREQuency [1 | 2]"
"[XNONe]POWer [2]"
Keysight 53147A/148A/149A Operating and Programming Guide
Std/New Comments
Std Subsystem setup commands.
New Subtree. Configures the averaging function.
New Turns averaging ON and OFF.
New Specifies the number of measurements to
combine when AVERage:STATe is ON.
Std Subtree. Configures the power-correction
function.
Std Selects a power-correction profile.
Std When STATe is ON, power measurements are
modified according to the data in the correction
profile selected with :SELect.
Std Query only. Returns the current measurement
result data of the SENSe subsystem.
Std Frequency on channel 1 or 2.
Std Power on channel 2.
Std Subtree. Controls the use of filtering
routines in the instrument.
New Turns automatic FM compensation ON or OFF.
Std Subtree. Controls the frequency-measuring
capabilities of the instrument.
Std Sets a reference frequency for all other absolute
frequency settings in the instrument.
New When STATe is ON, frequency measurements are
modified by the value of FREQ:OFFset.