Table of Contents
Advertisement
3
Programming
Front Panel to SCPI Command Map
Figure 3-1
between the front-panel keys and the SCPI commands. This map should help you
to identify commands, if you are already familiar with the front panel.
Some SCPI Syntax Conventions:
[ ]
1 | 2
<numeric_value>
SENSe
When you see quotation marks in a command's parameter (shown in the
NOTE
Parameter Form column in
the command. Refer to the section titled
on how to use double quotes or single quotes to enclose the string parameter of
a command.
134
and
Figure 3-2
are command maps that shows the relationships
An element inside brackets is optional. Note, the brackets are not part of
the command and should not be sent to the instrument.
Means use either 1 or 2.
Means enter a number.
Means you must use either all the upper case letters or the entire word.
The lower case letters are optional. For example, SENS and SENSE are
both valid.
However, SEN is not valid. (Note SENSe is used here as an example, but
this convention applies to all SCPI commands.)
Table
Keysight 53147A/148A/149A Operating and Programming Guide
3-2), you must send the quotation marks with
"Using BASIC"
on page 201 for details
Advertisement
Table of Contents
