Assembly - Chrysler Sebring 2005 Service Manual

21 - 294 41TE AUTOMATIC TRANSAXLE
INPUT CLUTCH ASSEMBLY (Continued)
(20) Using a suitably sized socket and an arbor
press, remove input shaft from input shaft hub (Fig.
230).
Fig. 230 Remove Input Shaft
1 - ARBOR PRESS RAM
2 - SOCKET
3 - SEAL
4 - O-RINGS
5 - INPUT SHAFT
6 - SEAL
7 - INPUT SHAFT HUB ASSEMBLY

ASSEMBLY

Use petrolatum on all seals to ease assembly of
components.
(1) Using an arbor press, install input shaft to
input shaft hub (Fig. 232).
(2) Install input shaft snap ring (Fig. 233).
(3) Using an arbor press and Tool 6057, Install
OD/Reverse piston return spring and snap ring (Fig.
234) (Fig. 235).
JR